CBM CBM1000 Instruções de Operação descarregar pdf (Página 127)

— 109 —

GS V m ......... (1)

GS V m n ..... (2)

[Function] Cutting the paper

[Code] (1) <1D>H<56>H<m>

(2) <1D>H<56>H<m><n>

[Range] (1) m = 1, m = 49

(2) m = 66

n 255

[Outline] Performs the specified paper cutting.

m Function

1,49 Partial cut (Leaving a bridge area uncut)

Paper feed by “cut position + {n × basic calculation

pitch}”and partial cut (Leaving a bridge area uncut)

[Caution] • Fully cut for the label sheet specs.

• In STANDARD MODE, this command only works when it is

entered at the beginning of a line.

For (1):

• A partial cut (Leaving a bridge area uncut) is executed.

For (2):

• If n = 0, the paper is fed to the cut position, and then cut. If n

≠ 0, the paper is fed by “n × basic calculation pitch” inches

past the cut position, and then cut.

• The basic calculation pitch is set by GS P.

The paper feed amount is calculated with the vertical basic

calculation pitch (y).

A fraction resulting from the calculation is corrected with the

minimum pitch of the mechanism, and the remainder is

omitted.

CAUTION:

When using label sheet:

• Be sure to cut the base sheet at every label gap. Otherwise, the cutter performance

will be immensely degraded.

• Never open the printer cover while printing as proper print operation may not be

guaranteed. Opening the printer cover may alter label length setting or other

parameters.

• Never use label rolls with different label sizes or label gaps as proper print

operation will not be guaranteed.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 229 230

Sem comentários

CBM CBM1000 Instruções de Operação Página 127